BFDXS - INTEX 8790
- MSDS: BFDXS
- Manufacturer: INTEX PRODUCTS INC
- Product Name: INTEX 8790
- National Stock Number: 6850-00-550-7453
Product Identification
Product ID:INTEX 8790
MSDS Date:01/01/1985
FSC:6850
NIIN:00-550-7453
MSDS Number: BFDXS
Responsible Party
Emergency Phone: 803-242-6152
Cage: HO425
Contractor
Telephone: 803-242-6152
Cage: HO425
Ingredients
CRESOL, ALL ISOMERS (CRESYLIC ACID) (SARA III)
CAS: 1319-77-3
RTECS: GO5950000
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CHROMIUM ION (CR 6+)
CAS: 18540-29-9
RTECS: GB6262000
Fraction By Weight: <0.2%
OSHA PEL C, 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.05 MG/M3 (CR);8990
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:SKIN: DRYING.EYE: IRRIT. INHAL: EYE &
RESPIRATORY IRRIT,DIZZ,NAUS,POSSIBLE UNCONSCIOUSNESS
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR,APPLY ARTIF RESP IF NEC,GET
MEDICAL AID. EYE/SKIN: FLUSH W/ WATER FOR 15 MINUTES GET MEDICAL
AID.
Fire Fighting
Flash Point:NONE
Extinguishing Media:CO*2,FOAM
Fire Fighting Procedures:WEAR SELF CONT BRTH APPAR
Unusual Fire/Explosion Hazard:SHOULD NOT BE STORED AT TEMP ABOVE 105F.
NO EXPLOSIVE CHARACTERISTICS.
Accidental Release
Spill Release Procedures:FLUSH W/ DETERGENT & WATER & MOP DRY.
Handling
Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 105F. USE
SAFETY PRECAUTIONS FOR HANDLING ALKALINE SOLVENT PRODUCTS
Other Precautions:NO SMOKING,FLAME CUTTING,ARC WELDING,OPEN FLAME OR
HOT SURFACES IN AREA OF USE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD SCBA OR INDUSTRIAL
CANISTER-TYPE MASK (MFR)
Ventilation:LOCAL-TO KEEP CONC BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:GOGGLES
Other Protective Equipment:RUBBER BOOTS & APRON
Supplemental Safety and Health
SPEC: TYPE II(DIPHASE). SPECIFIC GRAVITY: 1.14-1.18. CONTAINER: 55
GALLON DRUM
Chemical Properties
HCC:T4
Boiling Pt:B.P. Text:105F;41C
Vapor Density:>1
Evaporation Rate & Reference:>1 (NBUAC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:REDDISH TO RUST COLOR W/CRESYLIC ACID ODOR
Percent Volatiles by Volume:90
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:DO NOT LOSE WATER SEAL
Hazardous Decomposition Products:THERMAL DECOMP: CO,OXIDES OF
NITROGEN,SULFUR & PHOSGENE
Disposal
Waste Disposal Methods:DISPOSE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.